Telocytes in Human Embryonic Development: A Preliminary Microscopic Anatomy Study / Telocitos en el Desarrollo Embrionario Humano: Un Estudio Preliminar de Anatomía Microscópica

SUMMARY: Telocytes are a cell population described in 2011 with a multitude of functions such as tissue support, regulation of stem cell niches or intercellular signal transmission. However, there are no studies about their embryonic origin, their function in development, or their moment of appearance. The objective of this work is to try to answer these questions through histological and immunofluorescence studies with samples from the embryological collection of the Department of Anatomy of the University of Granada. In the results obtained, as demonstrated by immunofluorescence for CD34, the presence of these cells can be seen in the fourth week of embryonic development in the perinotochordal region. Its presence is evident from the sixth week of development in a multitude of organs such as the heart, skeletal muscle tissue and supporting tissue of various organs such as the kidney, brain or pericardium. Its function seems to be when the embryonic histological images are analyzed in an evolutionary way, to act as a scaffold or scaffold for the subsequent population by mature tissue elements. In conclusion, telocytes appear at a very early stage of embryonic development and would have a fundamental role in it as scaffolding and directors of organ and tissue growth.

Los telocitos son una población celular descrita en 2011 con multitud de funciones como el sostén tisular, la regulación de los nichos de células madre o la transmisión de señales intercelulares. Sin embargo, no existen estudios acerca del origen embrionario de los mismos, su función en el desarrollo ni su momento de aparición. El objetivo de este trabajo es tratar de responder a estos interrogantes mediante estudios histológicos y por inmunofluorescencia con muestras de la colección embriológica del Departamento de Anatomía de la Universidad de Granada. En los resultados se puede observar como se demuestra mediante inmunofluorescencia para CD34, la presencia de estas células en la cuarta semana del desarrollo embrionario en la región perinotocordal. Su presencia se evidencia a partir de la sexta semana del desarrollo en multitud de órganos como corazón, tejidos músculo esqueléticos y tejidos de sostén de diversos órganos como riñón, encéfalo o pericardio. Su función parece ser al ser analizadas las imágenes histológicas embrionarias de forma evolutiva, la de actuar como un andamiaje o scafold para el posterior poblamiento por elementos tisulares maduros. Como conclusión, los telocitos aparecen en un momento muy precoz del desarrollo embrionario y presentarían una función fundamental en el mismo como andamiajes y directores del crecimiento de los órganos y tejidos.

Demineralized dentin matrix technique - a comparison of different demineralizing solutions

Abstract This study aimed to evaluate the microstructure formed after the chemical treatment of teeth, for the development of autogenous grafts from the demineralized dentin matrix (DDM) technique, in order to identify the most efficient demineralizing solution. The specimens, originating from the root and coronal portion, were submitted to ultrasonic cleaning and drying in an oven for 1h at 100 ºC. Then, the density was determined by Archimedes' principle for each specimen, using distilled water as immersion liquid. The samples were separated into five groups: Control group: negative control, Distilled water;EDTA group: positive control, trisodium EDTA; NaOCl group: 2.5% sodium hypochlorite; HCl-0.6M group: 0.6M hydrochloric acid; and H2O2/H2SO4 group: hydrogen peroxide and sulfuric acid. Each specimen was immersed for 1h in the corresponding group descaling solution at 60 ºC. Subsequently, the mass loss and density of the treated specimens were determined by Archimedes' principle. Ultimately, the specimens of each group were characterized by microtomography, Scanning Electron Microscopy, and Energy Dispersive Spectrometry X-ray (SEM-EDS). The results demonstrated that the H2O2/H2SO4 solution allowed the formation of interconnected micropores, suggesting better pore structures for application in scaffolds, when compared to the other studied solutions.

Resumo Este estudo teve como objetivo avaliar a microestrutura formada após o tratamento químico em dentes, para o desenvolvimento de enxertos autógenos a partir da técnica de matriz de dentina desmineralizada (DDM), a fim de identificar a solução desmineralizante mais eficiente. Os espécimes, provenientes da raiz e porção coronal, foram submetidos à limpeza ultrassônica e secagem em estufa por 1h a 100 ºC. Em seguida, a densidade foi determinada pelo princípio de Arquimedes para cada espécime, utilizando água destilada como líquido de imersão. As amostras foram separadas em cinco grupos: Controle: controle negativo, Água destilada; EDTA: controle positivo, EDTA trissódico; NaOCl: hipoclorito de sódio 2,5%; HCl-0.6M: ácido clorídrico 0,6M; e H2O2/H2SO4: peróxido de hidrogênio e ácido sulfúrico. Cada espécime foi imerso por 1h na solução descalcificante de grupo correspondente a 60 ºC. Posteriormente, a perda de massa e a densidade dos espécimes tratados foram determinadas pelo princípio de Arquimedes. Por fim, os espécimes de cada grupo foram caracterizados por microtomografia, microscopia eletrônica de varredura e espectrometria de energia dispersiva de raios-X (SEM-EDS). Os resultados demonstraram que a solução H2O2/H2SO4 permitiu a formação de microporos interligados, sugerindo melhores estruturas de poros para aplicação em scaffolds, quando comparada às demais soluções estudadas.

Expression of Stro-1, Runx-2, Osterix, and Alp in Alveolar Bone Regeneration Process Following the Administration of Hydroxyapatite Gypsum Puger (HAGP) Scaffold

@#Introduction: Tooth extraction before denture placement could result in trauma and damage to up to 50% of the alveolar bone, inducing bone resorption, and affecting the patient’s quality of life. Hydroxyapatite Gypsum Puger (HAGP) can be used as an alternative to bone graft material which degrades slowly, affecting the proliferation and activity of cells that are responsible for bone tissue engineering. This study aimed to analyze the regeneration mechanism of alveolar bone by administering the HAGP scaffold and observing the Stro-1, Runx-2, Osterix, and ALP expression. Methods: Laboratory experimental research was conducted and we used 150-355µm HAGP scaffold particles, applied in vivo inside alveolar sockets of the rats for 7, 14, and 28 days, followed by immunohistochemical examination of Stro-1, Runx-2, Osterix, and ALP expressions. Results: The HAGP scaffold group showed that the Stro-1 expression was significantly higher than the K(-) group, and the Runx-2 expression increased on day 7 and decreased on day 28 in the HAGP and K(-) groups. Osterix expression increased from day 7, 14, to day 28. The high expression of Osterix on day 28 means it took over the Runx-2 function. In ALP there was a significant increase on day 7. ALP expression was a sign of early osteoblast differentiation and production by cells, this extracellular matrix mineralization is an indicator of the osteogenic process. Conclusion: Alveolar bone regeneration mechanism in rats revealed that the expression of Stro-1, Runx-2, Osterix, and ALP was higher in the HAGP scaffold group compared to the control group on days 7,14, and 28.

Application of three dimensional bio-printing materials for tissue engineering tracheal grafting / 中华器官移植杂志

Currently three dimensional bio-printing technology has become one of the hot topics for tissue engineering tracheal grafting.Different biomaterials have their own performance advantages in the preparation and regeneration of tracheal scaffolds.It is particularly imperative to seek natural or polymeric materials with excellent profiles of printability, structural stability and biocompatibility to enable neo-cartilage formation, neo-epithelialization and neo-vascularization of tissue engineering trachea grafting.This review summarized the shortcomings and challenges of classifying and applying materials for three dimensional bio-printing tissue engineering trachea, aiming to provide new rationales for researches and applications of tissue engineering tracheal grafting.

Research methods and progress of gradient multiphase scaffold materials promoting rotator cuff tenon-bone interface repair and regeneration / 中华骨科杂志

Regeneration of rotator cuff tendon-bone interface is crucial in rotator cuff repair. The tendon-bone interface consists of four continuous and gradual regions: the tendon region, the unmineralized fibrocartilage region, the mineralized fibrocartilage region, and the bone region. The development and regeneration of various regions in the tendon-bone interface is regulated by growth factors, inorganic ions, mechanical stimulation, and hypoxic environment. Inspired by factors affecting the development and regeneration of the tendon-bone interface, many researchers have designed gradient scaffold systems that promote regionalized regeneration of the tendon-bone interface. The gradient distribution of these scaffolds includes inorganic ion gradients and growth factor gradients. According to different gradients of the scaffold system, osteogenesis, chondrogenesis and tendon differentiation of cells at the tendon-bone interface are promoted, and the healing of the tendon-bone is synchronously completed to realize the repair and regeneration of the rotator cuff tendon-bone interface. Current studies indicated that gradient multiphase scaffolds had high academic research value and guided significance for future clinical applications in the reconstruction of the tendon-bone interface. In this paper, the factors affecting the development and regeneration of the tendon-bone interface are reviewed, and the effects of these factors on osteogenesis, chondrogenesis and tendon formation of various regions in promoting rotator cuff tendon-bone interface repair are summarized. The properties and effects of reported gradient multiphase scaffolds for rotator cuff injury are discussed, including gradient scaffolds containing inorganic ions and growth factors. Finally, the problems and future development opportunities of gradient multiphase support in rotator cuff repair are summarized.

Research progress of the application of peptide hydrogel in the revascularization of pulp regeneration / 国际生物医学工程杂志

In recent years, problems such as the devitalization of dental pulp and the increased brittleness and fragility of teeth after root canal treatment have attracted more and more attention. Therefore, pulp regeneration has become the focus of research in endodontics and periapical disease, in which vascularization is of paramount importance. It is found that peptide hydrogel scaffolds have been widely applied because of their properties of impacting cell behavior, promoting angiogenesis, and being adaptable. In this review paper, the research progress of the application of peptide hydrogel in the vascularization of pulp regeneration and the properties of various peptide hydrogels were summarized to provide a reference for the further application of peptide hydrogel in pulp regeneration.

Stress Relaxation Behavior of Collagen Type II- Silk Fibroin Composite Cartilage Scaffold under Different Degradation Cycles / 医用生物力学

Objective To study stress relaxation behaviors of cartilage scaffolds under different degradation cycles by using finite element analysis combined with theoretical models. Methods Based on the established degradation theoretical model, the elastic modulus of the scaffold was calculated under different degradation cycles. The finite element model of cartilage scaffolds was established and stress relaxation simulation was performed to analyze the variation of scaffold relaxation stress with time. The stress relaxation constitutive model was established to predict mechanical properties of the scaffold. Results The elastic modulus of cartilage scaffolds at 14 th, 28th, 42nd, 56th day after degradation was 32. 35, 31. 12, 29. 91, 28. 74 kPa, respectively. The upper layer for cartilage scaffolds was the largest. The overall relaxation stress of the scaffold decreased rapidly with time and then tended to be stable. At 8th week after degradation, the stress which the scaffold couldwithstand was still within the physiological load range of the cartilage. The predicted results of the stress relaxation constitutive model were in good agreement with the finite element simulation results. Conclusions The elastic modulus of the scaffold gradually decreases with the increase of degradation time. The longer the degradation period is, the less stress the scaffold can withstand. At the same degradation period, the larger the applied compressive strain, the larger the stress on the scaffold. Both the finite element simulation and stress relaxation constitutive model can effectively predict stress variations of cartilage scaffolds under degradation

In vivo transplantation of eye organoids and application of tissue engineering scaffolds / 器官移植

Eye organoid refers to a structure that possesses resembling cell types and functions to intraocular tissues, which is induced by stem cells in vitro. Transplanting it into the body for eye repair and regeneration is one of the key research directions in regenerative medicine, which also provides a novel direction and strategy for the treatment of major blinding diseases. As a carrier of biological tissue or cell growth, tissue engineering scaffold could support in vivo transplantation of eye organoids and promote their maturation. Organic combination of eye organoids and tissue engineering is a critical approach to realize in vivo integration of eye organoids and reconstruct corresponding structures and functions. In this review, the latest research status of eye organoids and in vivo transplantation were summarized, and relevant studies of tissue engineering scaffold-assisted eye organoid transplantation were highlighted, aiming to provide ideas and reference for subsequent inter-disciplinary research of eye organoids and tissue engineering.

Clinical value of plasma scaffold protein SEC16A in evaluating hepatitis B-related liver cirrhosis and hepatocellular carcinoma / 中华肝脏病杂志

Objective: To investigate the clinical value of plasma scaffold protein SEC16A level and related models in the diagnosis of hepatitis B virus-related liver cirrhosis (HBV-LC) and hepatocellular carcinoma (HBV-HCC). Methods: Patients with HBV-LC and HBV-HCC and a healthy control group diagnosed by clinical, laboratory examination, imaging, and liver histopathology at the Third Hospital of Hebei Medical University between June 2017 and October 2021 were selected. Plasma SEC16A level was detected using an enzyme-linked immunosorbent assay (ELISA). Serum alpha-fetoprotein (AFP) was detected using an electrochemiluminescence instrument. SPSS 26.0 and MedCalc 15.0 statistical software were used to analyze the relationship between plasma SEC16A levels and the occurrence and development of liver cirrhosis and liver cancer. A sequential logistic regression model was used to analyze relevant factors. SEC16A was established through a joint diagnostic model. Receiver operating characteristic curve was used to evaluate the clinical efficacy of the model for liver cirrhosis and hepatocellular carcinoma diagnosis. Pearson correlation analysis was used to identify the influencing factors of novel diagnostic biomarkers. Results: A total of 60 cases of healthy controls, 60 cases of HBV-LC, and 52 cases of HBV-HCC were included. The average levels of plasma SEC16A were (7.41 ± 1.66) ng/ml, (10.26 ± 1.86) ng/ml, (12.79 ± 1.49) ng /ml, respectively, with P < 0.001. The sensitivity and specificity of SEC16A in the diagnosis of liver cirrhosis and hepatocellular carcinoma were 69.44% and 71.05%, and 89.36% and 88.89%, respectively. SEC16A, age, and AFP were independent risk factors for the occurrence of HBV-LC and HCC. SAA diagnostic cut-off values, sensitivity, and specificity were 26.21 and 31.46, 77.78% and 81.58%, and 87.23% and 97.22%, respectively. The sensitivity and specificity for HBV-HCC early diagnosis were 80.95% and 97.22%, respectively. Pearson correlation analysis showed that AFP level was positively correlated with alanine aminotransferase (ALT), aspartate aminotransferase (AST), total bilirubin (TBil), and γ-glutamyltransferase (GGT) with P < 0.01, while the serum SEC16A level was only slightly positively correlated with ALT and AST in the liver cirrhosis group (r = 0.268 and 0.260, respectively, P < 0.05). Conclusion: Plasma SEC16A can be used as a diagnostic marker for hepatitis B-related liver cirrhosis and hepatocellular carcinoma. SEC16A, combined with age and the AFP diagnostic model with SAA, can significantly improve the rate of HBV-LC and HBV-HCC early diagnosis. Additionally, its application is helpful for the diagnosis and differential diagnosis of the progression of HBV-related diseases.

Parotid duct anastomosis with an epidural catheter as a stent and evaluation of postoperative gland function / 口腔疾病防治

Objective @#To investigate the feasibility of epidural catheters in parotid gland duct anastomosis and the function of the affected side gland after parotid gland duct anastomosis. @* Methods@# Thirteen patients who were treated in the Department of Oral and Maxillofacial Surgery of Xuzhou Central Hospital using an epidural catheter as the scaffold for parotid gland catheter anastomosis were enrolled from Jan. 2019 to June 2021. The swelling, salivary fistula and catheter patency in the parotid gland area were evaluated two weeks after the operation. 99mTcO4- single photon emission computed tomography (SPECT) was used for quantitative detection of salivary gland secretion function@*Results@# Thirteen patients had no swelling or salivary fistula in the parotid gland area of the affected side two weeks after the operation, and the catheter secretion was unobstructed. There was no significant difference in the uptake rate between the parotid gland on the affected side and the parotid gland on the healthy side (t = -0.859, P = 0.399), and there was no significant difference in the excretion rate between the parotid gland on the affected side and the parotid gland on the healthy side (t = 0.693, P = 0.495). The parotid gland excretion function of the affected side was excellent three months after the operation.@*Conclusion @#Parotid duct anastomosis with an epidural catheter as the stent has good feasibility, and parotid gland secretion function recovers well after the operation, which is worthy of clinical application.

Deubiquitination complex platform: A plausible mechanism for regulating the substrate specificity of deubiquitinating enzymes

Deubiquitinating enzymes (DUBs) or deubiquitinases facilitate the escape of multiple proteins from ubiquitin‒proteasome degradation and are critical for regulating protein expression levels in vivo. Therefore, dissecting the underlying mechanism of DUB recognition is needed to advance the development of drugs related to DUB signaling pathways. To data, extensive studies on the ubiquitin chain specificity of DUBs have been reported, but substrate protein recognition is still not clearly understood. As a breakthrough, the scaffolding role may be significant to substrate protein selectivity. From this perspective, we systematically characterized the scaffolding proteins and complexes contributing to DUB substrate selectivity. Furthermore, we proposed a deubiquitination complex platform (DCP) as a potentially generic mechanism for DUB substrate recognition based on known examples, which might fill the gaps in the understanding of DUB substrate specificity.

Dentin slice model of dental stem cells in a fibrin-agarose construct for dental pulp regeneration / Modelo de trozo de dentina de células madre dentales en una construcción de fibrina-agarosa para la regeneración de la pulpa dental

Objectives: To implement a dentin slice model of mesenchymal stem cells derived from dental tissues in a fibrin-agarose construct for dental pulp regeneration. Material and Methods: MSCs derived from different oral cavity tissues were combined with a fibrin-agarose construct at standard culture conditions. Cell viability and proliferation tests were assayed using a fluorescent cell dye Calcein/Am and WST-1 kit. The proliferation assay was evaluated at 24, 48, 72, and 96 hours. Also, we assessed the dental pulp stem cells (DPSCs) cell morphology inside the construct with histological stains such as Hematoxylin and Eosin, Masson's trichrome, and Periodic acid­Schiff. In addition, we elaborated a tooth dentin slice model using a culture of DPSC in the fibrin­agarose constructs co-adhered to dentin walls. Results: The fibrin-agarose construct was a biocompatible material for MSCs derived from dental tissues. It provided good conditions for MSCs' viability and proliferation. DPSCs proliferated better than the other MSCs, but the data did not show significant differences. The morphology of DPSCs inside the construct was like free cells. The dentin slice model was suitable for DPSCs in the fibrin-agarose construct. Conclusion: Our findings support the dentin slice model for future biological use of fibrin-agarose matrix in combination with DPSCs and their potential use in dental regeneration. The multipotency, high proliferation rates, and easy obtaining of the DPSCs make them an attractive source of MSCs for tissue regeneration.

Objetivos: Implementar un modelo de dentina con células madre mesenquimales derivadas de tejidos dentales en una constructo de fibrina-agarosa para la regeneración de la pulpa dental. Material y Métodos: Las MSC derivadas de diferentes tejidos de la cavidad oral se combinaron con una construcción de fibrina-agarosa en condiciones de cultivo estándar. Las pruebas de viabilidad y proliferación celular se ensayaron utilizando un kit de colorante celular fluorescente Calcein/Am y WST-1. El ensayo de proliferación se evaluó a las 24, 48, 72 y 96 horas. Además, evaluamos la morfología celular de las células madre de la pulpa dental (DPSC) dentro de la construcción con tinciones histológicas como hematoxilina y eosina, tricrómico de Masson y ácido peryódico de Schiff. Además, elaboramos un modelo de rebanadas de dentina dental utilizando un cultivo de DPSC en las construcciones de fibrina-agarosa coadheridas a las paredes de la dentina. Resultados: La construcción de fibrina-agarosa fue un material biocompatible para las MSC derivadas de tejidos dentales. Proporcionó buenas condiciones para la viabilidad y proliferación de las MSC. Las DPSC proliferaron mejor que las otras MSC, pero los datos no mostraron diferencias significativas. La morfología de las DPSC dentro de la construcción era como la de las células libres. El modelo de corte de dentina fue adecuado para DPSC en la construcción de fibrina-agarosa.Conclusión: Nuestros hallazgos respaldan el modelo de corte de dentina para el futuro uso biológico de la matriz de fibrina-agarosa en combinación con DPSC y su uso potencial en la regeneración dental. El multipotencial, las altas tasas de proliferación y la fácil obtención de las DPSC las convierten en una fuente atractiva de MSC para la regeneración de tejidos.

A novel biodegradable polymer scaffold for in vitro growth of corneal epithelial cells

The shortage of donor corneal tissue worldwide has led to extensive research for alternate corneal equivalents utilizing tissue engineering methods. We conducted experiments using Poly D, L lactic acid polymer along with a copolymer (Eudragit) in varying concentrations to create a biodegradable scaffold suitable for in vitro growth of corneal epithelial stem cells. It was found that stable, spherical, and porous microparticles can be prepared by combining PDLLA and Eudragit RL100 polymers in the ratio of 90:10 and 70:30. The microparticles can then be fused to form scaffold membranes with porous architecture and good water retention capacity at room temperature using methanol, which can withstand handling during transplantation procedures. The scaffolds made using a 70:30 ratio were found to be suitable for the promotion of growth of laboratory corneal epithelial stem cell lines (SIRC cell lines). This innovation can pave way for further developments in corneal stem cell research and growth, thus providing for viable laboratory-derived corneal substitutes.

Ginseng used for bone tissue scaffold

The scaffold based tissue engineering materialized for bone tissue therapy. Gelatin-glutaraldehyde cross linked scaffold was prepared by solvent casting -porogen leaching method. It was characterized by FTIR and SEM microphotograph analysis. Absence of peak at waves no. 1625 cm?1 in ATR-FTIR indicated formation of cross-linking. FE-SEM micrograph showed honeycomb pad like structure with high porosity. Methanolic extract of Withania somnifera (Ashwagandha) root extract induced MC3T3 E1 osteoblast cell adhesion and proliferation on porous gelatin scaffold. GC-MS analysis pointed out presence of 4-amino- 2-ethyl-3-methylquinoline, an active phyto-chemicals having tissue regeneration potential. High anti-oxidant capacity down regulates cell death mechanism by scavenging free radical. The biocompatible gelatin scaffold has RGD moiety that attune the MC3T3 E1 osteoblast cell adhesion. Withania somnifera root extract may boost up cell proliferation on scaffold. Therefore treatment with Withania somnifera root extract may be the new approaches for designing bone tissue scaffold for bone tissue therapy.

Biocompatible chitosan/polyethylene glycol/multi-walled carbon nanotube composite scaffolds for neural tissue engineering / 浙江大学学报（英文版）（B辑：生物医学和生物技术）

Carbon nanotube (CNT) composite materials are very attractive for use in neural tissue engineering and biosensor coatings. CNT scaffolds are excellent mimics of extracellular matrix due to their hydrophilicity, viscosity, and biocompatibility. CNTs can also impart conductivity to other insulating materials, improve mechanical stability, guide neuronal cell behavior, and trigger axon regeneration. The performance of chitosan (CS)/polyethylene glycol (PEG) composite scaffolds could be optimized by introducing multi-walled CNTs (MWCNTs). CS/PEG/CNT composite scaffolds with CNT content of 1%, 3%, and 5% (1%=0.01 g/mL) were prepared by freeze-drying. Their physical and chemical properties and biocompatibility were evaluated. Scanning electron microscopy (SEM) showed that the composite scaffolds had a highly connected porous structure. Transmission electron microscope (TEM) and Raman spectroscopy proved that the CNTs were well dispersed in the CS/PEG matrix and combined with the CS/PEG nanofiber bundles. MWCNTs enhanced the elastic modulus of the scaffold. The porosity of the scaffolds ranged from 83% to 96%. They reached a stable water swelling state within 24 h, and swelling decreased with increasing MWCNT concentration. The electrical conductivity and cell adhesion rate of the scaffolds increased with increasing MWCNT content. Immunofluorescence showed that rat pheochromocytoma (PC12) cells grown in the scaffolds had characteristics similar to nerve cells. We measured changes in the expression of nerve cell markers by quantitative real-time polymerase chain reaction (qRT-PCR), and found that PC12 cells cultured in the scaffolds expressed growth-associated protein 43 (GAP43), nerve growth factor receptor (NGFR), and class III β‍-tubulin (TUBB3) proteins. Preliminary research showed that the prepared CS/PEG/CNT scaffold has good biocompatibility and can be further applied to neural tissue engineering research.

Antibacterial and osteogenic properties of vancomycin/PLGA-coated porous magnesium alloy scaffolds / 中华创伤骨科杂志

Objective:To evaluate the physicochemical properties, degradation and drug release behaviour, cytocompatibility and bacteriostatic properties in vitro of porous magnesium alloy scaffolds containing vancomycin/poly(lactic-co-glycolic acid) (PLGA). Methods:Porous magnesium scaffolds (Mg-2Zn-0.3Ca) were prepared using the template replication technique. The MgF 2 surface layer was obtained by high temperature fluorination. The vancomycin/PLGA porous magnesium alloy drug-loaded scaffolds were obtained by homogeneous lifting after submersion in a dichloromethane solution of PLGA containing vancomycin hydrochloride. According to the products at each stage of the preparation (scaffolds of magnesium alloy, magnesium fluoride alloy, PLGA coated magnesium fluoride alloy, and vancomycin/PLGA magnesium fluoride alloy), they were divided into an Mg group, an MgF 2 group, a PLGA group, and a vancomycin/PLGA group. Immediately after preparation, the material science characterization, degradation rate, drug release rate, antibacterial properties, hemocompatibility, and cell proliferation and differentiation ability of the scaffolds were measured and evaluated. Results:Vancomycin-loaded magnesium alloy scaffolds were successfully prepared with an average porosity of 66.39%. Their degradation rate [(0.540±0.102) mm/year] was significantly lower than that of the Mg ones [(10.048±0.297) mm/year] ( P<0.05). Their pH of degradation in Hank equilibrium salt solution was close to the physiological pH. Their release of vancomycin was fast in the first 48 h and gradually slowed down after 48 h. Their cumulative drug concentration reached a maximum of 43 mg/L at d 11; their vancomycin was still released slowly after d 11. The antimicrobial rate in the vancomycin/PLGA group (97.89%±0.28%) was significantly higher than that in the Mg group (74.92%±2.20%), the MgF 2 group (78.46%±2.59%) and the PLGA group (61.08%±4.21%) ( P<0.05). Their hemolysis rate (0.55%) was much lower than the requirement of ISO 10993-4 (5%). The extract liquid from them promoted the proliferation of rat bone marrow mesenchymal stem cells (BMSCs), showing a gradually increased proliferation rate from d1 (104.80%±5.13%) to d3 (112.36%±2.07%) and d7 (127.79%±4.61%). The calcium nodules in BMSCs were significantly increased at d 14, with an OD value of absorbance of 1.189±0.020, significantly higher than that in the Mg group (0.803±0.020), the MgF 2 group (0.878±0.028) and the PLGA group (0.887±0.026) ( P<0.05). Conclusion:Vancomycin/PLGA-loaded porous magnesium alloy scaffolds exhibit good material properties, antibacterial properties, biocompatibility and osteogenic properties in vitro.

Research progress on effect of magnetic nanoparticle composite scaffold on osteogenesis / 浙江大学学报·医学版

Magnetic nanoparticles (MNP) have been widely used as biomaterials due to their unique magnetic responsiveness and biocompatibility, which also can promote osteogenic differentiation through their inherent micro-magnetic field. The MNP composite scaffold retains its superparamagnetism, which has good physical, mechanical and biological properties with significant osteogenic effects and . Magnetic field has been proved to promote bone tissue repair by affecting cell metabolic behavior. MNP composite scaffolds under magnetic field can synergically promote bone tissue repair and regeneration, which has great application potential in the field of bone tissue engineering. This article summarizes the performance of magnetic composite scaffold, the research progress on the effect of MNP composite scaffold with magnetic fields on osteogenesis, to provide reference for further research and clinical application.

Application of microcarrier technology in cartilage repairing: a review / 生物工程学报

Cartilage has poor self-recovery because of its characteristics of no blood vessels and high extracellular matrix. In clinical treatment, physical therapy or drug therapy is usually used for mild cartilage defects, and surgical treatment is needed for severe ones. In recent years, cartilage tissue engineering technology provides a new way for the treatment of cartilage defects. Compared with the traditional surgical treatment, cartilage tissue engineering technology has the advantages of small wound and good recovery. The application of microcarrier technology in the design of tissue engineering scaffolds further expands the function of scaffolds and promotes cartilage regeneration. This review summarized the main preparation methods and development of microcarrier technology in recent years. Subsequently, the properties and specific application scenarios of microcarriers with different materials and functions were introduced according to the materials and functions of microcarriers used in cartilage repair. Based on our research on osteochondral integrated layered scaffolds, we proposed an idea of optimizing the performance of layered scaffolds through microcarriers, which is expected to prepare bionic scaffolds that are more suitable for the structural characteristics of natural cartilage.

Research progress on injectable hydrogel scaffolds in dental pulp regeneration / 口腔疾病防治

@#Tissue engineering provides a new possibility for pulp regeneration. As one of the three elements of tissue engineering, scaffolds have attracted increasing attention. Because the root canal system is limited by the unique anatomical structure of the long and narrow lumen, the preformed scaffold cannot be completely covered with the whole root canal space, although it is convenient to apply, so the injectable scaffold may be an ideal choice for pulp tissue engineering. Hydrogels are hydrophilic polymer networks with physical properties similar to soft tissues. They can provide a porous hydrophilic microenvironment, which facilitates the diffusion of oxygen and nutrients. In recent years, researchers have used injectable hydrogels with different mechanical properties and/or loaded biologically active ingredients as scaffolds to promote revascularization and the regeneration of pulp. The results show that natural polymer hydrogels, synthetic polymer hydrogels, and composite hydrogels combining natural and synthetic polymers all have excellent biocompatibility. The types and mechanical properties of hydrogels and the addition of bioactive ingredients can influence the behavior of stem cells, and gelatin-based hydrogels and fibrin-based hydrogels can also achieve rapid vascularization, which creates the conditions for the formation of pulp-like tissues. Among them, photocrosslinked methacrylated gelatin/hyaluronic acid hydrogels, two/multicomponent hydrogels combined with chitosan with antibacterial and temperature-sensitive properties and new self-assembled peptides have become major research topics in recent years due to their excellent properties. To develop suitable hydrogel scaffolds and promote their application in pulp regeneration, this article reviews the research progress in the types, preparation, and application of injectable hydrogels used for dental pulp regeneration.